OR/14/065 Modelled volume, purpose and scale: Difference between revisions
Jump to navigation
Jump to search
m Protected "OR/14/065 Modelled volume, purpose and scale" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite)) [cascading] |
m Removed protection from "OR/14/065 Modelled volume, purpose and scale" |
||
(No difference)
| |||
Latest revision as of 13:06, 19 February 2016
| Finlayson, A G, and Arkley, S L B. 2014. Model metadata report for the Moray Ness regional GSI3D model. British Geological Survey Internal Report, OR/14/065. |
The Moray Ness Regional GSI3D model covers an area of over 1200 km2; it is bounded to the north by the Moray Firth and to the south by higher ground where basement rock outcrops at surface (Figure 1).
The model was constructed to provide a calculated model framework for Zoom ground water flow modelling in relation to alleviating and preventing the threat of flooding in the region, see MacDonald et al, 2008[1] and Vounaki, Hughes and MacDonald, 2011[2].
The model is suitable for scales up to 1:625 000, down to a depth of -400 m OD.
References
- ↑ MACDONALD, A M, HUGHES, A G, VOUNAKI, T, GRAHAM, M T, LILLY, A, MANSOUR, M, and STEPHENS, C A. 2008. Groundwater and the Forres (River Findhorn & Pilmuir) Flood Alleviation Scheme, Morayshire. British Geological Survey Commissioned Report. CR/08/023.
- ↑ VOUNAKI, T, HUGHES, A G, and MACDONALD, A M. 2011. Regional and catchment scale groundwater models of the superficial deposits underlying the Moray Ness area: Initial results. British Geological Survey Open Report. OR/11/024.