Dbk: 1 revision imported

2016-03-08T09:30:35Z

1 revision imported

← Older revision	Revision as of 10:30, 8 March 2016
(No difference)

Dbk: /* Edge matching with Keith */

2016-03-07T14:32:29Z

Edge matching with Keith

New page

__notoc__
{{OR/15/035}}
==Modelling notes==
===HS2_Area4_Route_JT===
03 April 2014 
11:42

03/04/2014

=== HS2_Area4_NWSE_Section2 ===
03 April 2014 
13:53

Surface geology suggests folding within the DYS-MRB-WHM although this is not marked on the map (around Cropredy Lawn/Beecham's cottages), this may fit in with localised faulting. It is unclear from the fieldslip what evidence was used — there is a borehole (#88 on field slip, SP44NE73, 331590) which has 2' soil, 3' yellow clay, 85' blue clay/lmst). This would suggest possibly a valley head overlying CHAM. Fieldslips illegible! But the hand drawn contours suggest that the geologist was fitting the outcrop to the contours which aren't quite correct. WHM outcrop possibly should be on top of the small hill instead?

16/04/2014

Faulting — check how deep likely to go. Banbury fault (on Banbury sheet but not within model area, stops within Charmouth mudstone according to 50K sheet cross section).

Need to add in BCMU below BAN

=== HS2_Area4_NWSE_Section4 ===
03 April 2014 
15:12

Dips of deeper units arbitrarily adjusted to account for change in section direction.

Outcrop of DYS in valley near Byfield does not fit with borehole info or topo so I have left it out.

=== General — all sections ===
03 April 2014 
17:09

Deeper geology in all sections taken from boreholes where possible but roughly tracked along elsewhere.

=== HS2_Area4_NWSE_Section10_JT ===
03 April 2014 
17:09

Mapping and borehole do not agree in extent of WHM.

=== HS2_Area4_NESW_Section5 ===
28 May 2014 
11:49

The throw on the fault at the western end of this section is unclear - it changes along its length

=== HS2_Area4_ROUTE_JT ===
26 June 2014 
16:06

Completing this (straight) section showed a kink in the CHAM halfway along the section (at HS2_Area4_NESW_Section4)which I have straightened out and will use to adjust other sections.

=== Edge matching with Keith ===
10 July 2014 
10:04

Section8_KA thicknesses at eastern end not as expected

Inconsistent naming — what is SASH? Salford Shale, lower part of BLI — dies out in northern part of Area 4.

Faulting in northeast corner?? Not sure, KAM to investigate.

LPMB/RLS equivalent to BLI and WLI?? WLI = Langport Member (LPMB), BLI = SASH and RLS

04/09/2014

Edge matching issues — talk to Keith about his section 18, borehole 332324 — why has he not used the level for PNG?

=== Section 7 <nowiki>*</nowiki>Check ===
10 July 2014 
17:08

Something not right now I have snapped to KAM's sections — check.

=== HS2_AREA4_NESW_Section3 ===
30 July 2014 
14:01

Re-do? Dog-leg in section is not reflected in units.

=== Section 8 ===
30 July 2014 
14:46

Check dip of upper units at western end. Adjusted to be more level.

=== HS2_Area4_NWSE_Section1 ===
04 September 2014 
13:31

Adjusted LPMB

=== Outcrop changes ===
11 September 2014 
15:11

MRB on section 11, adjusted slightly to fit in with alluvium

[[category: OR/15/035 Model metadata report for HS2 Area 4 | 11]]

OR/15/035 Appendix 1 - Revision history

Dbk: 1 revision imported

Dbk: /* Edge matching with Keith */