OR/14/029 Introduction - Revision history

Dbk at 12:29, 17 February 2016

2016-02-17T12:29:11Z

← Older revision		Revision as of 13:29, 17 February 2016
Line 1:		Line 1:
	{{Template:OR/14/029}}		{{Template:OR/14/029}}
	The London Basin 1:50 000 resolution geological model covers a total area of ~~4 800~~ km<sup>2</sup> in southeast England (Figure 1), stretching from easting 450 000 to 570 000 and from northing 160 000 to 200 000. Because of the large size of the modelled area, the initial construction was divided into twelve 20 x 20 km tiles (Figure 1). A separate 3D geological model was constructed for each tile using the GSI3D software and methodology (Kessler & Mathers 2004<ref name="Kessler 2004">KESSLER, H and MATHERS, S J. 2004. From geological maps to models — finally capturing the geologists’ vision. ''Geoscientist'', 14/10, pp. 4–6. </ref>, Kessler et al. 2009<ref name="Kessler 2009">KESSLER, H, MATHERS, S J and SOBISCH, H-G., 2009. The capture and dissemination of integrated 3D geospatial knowledge at the British Geological Survey using GSI3D software and methodology. ''Computers and Geosciences'', vol 35, pp 1311–1321. </ref>). The twelve model tiles were later merged into a unified model and subsequent modelling and calculation of the bedrock units was completed in GOCAD®. This report summarises the metadata compiled during the construction of the individual tiles and the development of the combined model.		The London Basin 1:50 000 resolution geological model covers a total area of 4800 km<sup>2</sup> in southeast England (Figure 1), stretching from easting 450 000 to 570 000 and from northing 160 000 to 200 000. Because of the large size of the modelled area, the initial construction was divided into twelve 20 x 20 km tiles (Figure 1). A separate 3D geological model was constructed for each tile using the GSI3D software and methodology (Kessler & Mathers 2004<ref name="Kessler 2004">KESSLER, H and MATHERS, S J. 2004. From geological maps to models — finally capturing the geologists’ vision. ''Geoscientist'', 14/10, pp. 4–6. </ref>, Kessler et al. 2009<ref name="Kessler 2009">KESSLER, H, MATHERS, S J and SOBISCH, H-G., 2009. The capture and dissemination of integrated 3D geospatial knowledge at the British Geological Survey using GSI3D software and methodology. ''Computers and Geosciences'', vol 35, pp 1311–1321. </ref>). The twelve model tiles were later merged into a unified model and subsequent modelling and calculation of the bedrock units was completed in GOCAD®. This report summarises the metadata compiled during the construction of the individual tiles and the development of the combined model.

	[[Image:OR14029_figure1.jpg\|thumb\|600px\|center\|'''Figure 1''' Location of the London model and component tiles.]]		[[Image:OR14029_figure1.jpg\|thumb\|600px\|center\|'''Figure 1''' Location of the London model and component tiles.]]

Dbk at 09:57, 10 August 2015

2015-08-10T09:57:25Z

← Older revision		Revision as of 10:57, 10 August 2015
Line 1:		Line 1:
	{{Template:OR/14/029}}		{{Template:OR/14/029}}
	The London Basin 1:50 000 resolution geological model covers a total area of 4 800 km<sup>2</sup> in southeast England (Figure 1), stretching from easting 450 000 to 570 000 and from northing 160 000 to 200 000. Because of the large size of the modelled area, the initial construction was divided into twelve 20 x 20 km tiles (Figure 1). A separate 3D geological model was constructed for each tile using the GSI3D software and methodology (Kessler & Mathers 2004, Kessler et al. 2009). The twelve model tiles were later merged into a unified model and subsequent modelling and calculation of the bedrock units was completed in GOCAD®. This report summarises the metadata compiled during the construction of the individual tiles and the development of the combined model.		The London Basin 1:50 000 resolution geological model covers a total area of 4 800 km<sup>2</sup> in southeast England (Figure 1), stretching from easting 450 000 to 570 000 and from northing 160 000 to 200 000. Because of the large size of the modelled area, the initial construction was divided into twelve 20 x 20 km tiles (Figure 1). A separate 3D geological model was constructed for each tile using the GSI3D software and methodology (Kessler & Mathers 2004<ref name="Kessler 2004">KESSLER, H and MATHERS, S J. 2004. From geological maps to models — finally capturing the geologists’ vision. ''Geoscientist'', 14/10, pp. 4–6. </ref>, Kessler et al. 2009<ref name="Kessler 2009">KESSLER, H, MATHERS, S J and SOBISCH, H-G., 2009. The capture and dissemination of integrated 3D geospatial knowledge at the British Geological Survey using GSI3D software and methodology. ''Computers and Geosciences'', vol 35, pp 1311–1321. </ref>). The twelve model tiles were later merged into a unified model and subsequent modelling and calculation of the bedrock units was completed in GOCAD®. This report summarises the metadata compiled during the construction of the individual tiles and the development of the combined model.

	[[Image:OR14029_figure1.jpg\|thumb\|600px\|center\|'''Figure 1''' Location of the London model and component tiles.]]		[[Image:OR14029_figure1.jpg\|thumb\|600px\|center\|'''Figure 1''' Location of the London model and component tiles.]]

			==References==



	[[Category:OR/14/029 The London Basin superficial and bedrock LithoFrame 50 model\| 01]]		[[Category:OR/14/029 The London Basin superficial and bedrock LithoFrame 50 model\| 01]]

Dbk at 16:13, 11 March 2015

2015-03-11T16:13:51Z

← Older revision		Revision as of 17:13, 11 March 2015
Line 1:		Line 1:
	{{Template:OR/14/029}}		{{Template:OR/14/029}}
	The London Basin 1:50 000 resolution geological model covers a total area of 4 800 km<sup>2</sup> in southeast England (Figure 1), stretching from easting 450 000 to 570 000 and from northing 160 000 to 200 000. Because of the large size of the modelled area, the initial construction was divided into twelve 20 x 20 km tiles (Figure 1). A separate 3D geological model was constructed for each tile using the GSI3D software and methodology (Kessler & Mathers 2004, Kessler et al. 2009). The twelve model tiles were later merged into a unified model and subsequent modelling and calculation of the bedrock units was completed in GOCAD®. This report summarises the metadata compiled during the construction of the individual tiles and the development of the combined model.		The London Basin 1:50 000 resolution geological model covers a total area of 4 800 km<sup>2</sup> in southeast England (Figure 1), stretching from easting 450 000 to 570 000 and from northing 160 000 to 200 000. Because of the large size of the modelled area, the initial construction was divided into twelve 20 x 20 km tiles (Figure 1). A separate 3D geological model was constructed for each tile using the GSI3D software and methodology (Kessler & Mathers 2004, Kessler et al. 2009). The twelve model tiles were later merged into a unified model and subsequent modelling and calculation of the bedrock units was completed in GOCAD®. This report summarises the metadata compiled during the construction of the individual tiles and the development of the combined model.
	[[Image:OR14029_figure1.jpg\|thumb\|600px\|center\|Figure 1 Location of the London model and component tiles.]]		[[Image:OR14029_figure1.jpg\|thumb\|600px\|center\|'''Figure 1''' Location of the London model and component tiles.]]



	[[Category:OR/14/029 The London Basin superficial and bedrock LithoFrame 50 model\| 01]]		[[Category:OR/14/029 The London Basin superficial and bedrock LithoFrame 50 model\| 01]]

Dbk: Protected "OR/14/029 Introduction" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite)) [cascading]

2015-03-11T15:40:15Z

Protected "OR/14/029 Introduction" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite)) [cascading]

← Older revision	Revision as of 16:40, 11 March 2015
(No difference)

Dbk at 09:23, 10 March 2015

2015-03-10T09:23:18Z

← Older revision		Revision as of 10:23, 10 March 2015
Line 1:		Line 1:
			{{Template:OR/14/029}}
	The London Basin 1:50 000 resolution geological model covers a total area of 4 800 km<sup>2</sup> in southeast England (Figure 1), stretching from easting 450 000 to 570 000 and from northing 160 000 to 200 000. Because of the large size of the modelled area, the initial construction was divided into twelve 20 x 20 km tiles (Figure 1). A separate 3D geological model was constructed for each tile using the GSI3D software and methodology (Kessler & Mathers 2004, Kessler et al. 2009). The twelve model tiles were later merged into a unified model and subsequent modelling and calculation of the bedrock units was completed in GOCAD®. This report summarises the metadata compiled during the construction of the individual tiles and the development of the combined model.		The London Basin 1:50 000 resolution geological model covers a total area of 4 800 km<sup>2</sup> in southeast England (Figure 1), stretching from easting 450 000 to 570 000 and from northing 160 000 to 200 000. Because of the large size of the modelled area, the initial construction was divided into twelve 20 x 20 km tiles (Figure 1). A separate 3D geological model was constructed for each tile using the GSI3D software and methodology (Kessler & Mathers 2004, Kessler et al. 2009). The twelve model tiles were later merged into a unified model and subsequent modelling and calculation of the bedrock units was completed in GOCAD®. This report summarises the metadata compiled during the construction of the individual tiles and the development of the combined model.
	[[Image:OR14029_figure1.jpg\|thumb\|600px\|center\|Figure 1 Location of the London model and component tiles.]]		[[Image:OR14029_figure1.jpg\|thumb\|600px\|center\|Figure 1 Location of the London model and component tiles.]]

	~~{{Template:OR/14/029}}~~

	[[Category:OR/14/029 The London Basin superficial and bedrock LithoFrame 50 model\| 01]]		[[Category:OR/14/029 The London Basin superficial and bedrock LithoFrame 50 model\| 01]]

Dbk at 17:12, 9 March 2015

2015-03-09T17:12:15Z

← Older revision		Revision as of 18:12, 9 March 2015
Line 1:		Line 1:
	The London Basin 1:50 000 resolution geological model covers a total area of 4 800 km<sup>2</sup> in southeast England (Figure 1), stretching from easting 450 000 to 570 000 and from northing 160 000 to 200 000. Because of the large size of the modelled area, the initial construction was divided into twelve 20 x 20 km tiles (Figure 1). A separate 3D geological model was constructed for each tile using the GSI3D software and methodology (Kessler & Mathers 2004, Kessler et al. 2009). The twelve model tiles were later merged into a unified model and subsequent modelling and calculation of the bedrock units was completed in GOCAD®. This report summarises the metadata compiled during the construction of the individual tiles and the development of the combined model.		The London Basin 1:50 000 resolution geological model covers a total area of 4 800 km<sup>2</sup> in southeast England (Figure 1), stretching from easting 450 000 to 570 000 and from northing 160 000 to 200 000. Because of the large size of the modelled area, the initial construction was divided into twelve 20 x 20 km tiles (Figure 1). A separate 3D geological model was constructed for each tile using the GSI3D software and methodology (Kessler & Mathers 2004, Kessler et al. 2009). The twelve model tiles were later merged into a unified model and subsequent modelling and calculation of the bedrock units was completed in GOCAD®. This report summarises the metadata compiled during the construction of the individual tiles and the development of the combined model.
	[[Image:OR14029_figure1.jpg\|thumb\|600px\|center\|Figure 1 Location of the London model and component tiles.]]		[[Image:OR14029_figure1.jpg\|thumb\|600px\|center\|Figure 1 Location of the London model and component tiles.]]

			{{Template:OR/14/029}}

	[[Category:OR/14/029 The London Basin superficial and bedrock LithoFrame 50 model\| 01]]		[[Category:OR/14/029 The London Basin superficial and bedrock LithoFrame 50 model\| 01]]

Dbk at 11:58, 6 March 2015

2015-03-06T11:58:49Z

← Older revision		Revision as of 12:58, 6 March 2015
Line 1:		Line 1:
	The London Basin 1:50 000 resolution geological model covers a total area of 4 800 km<sup>2</sup> in southeast England (Figure 1), stretching from easting 450 000 to 570 000 and from northing 160 000 to 200 000. Because of the large size of the modelled area, the initial construction was divided into twelve 20 x 20 km tiles (Figure 1). A separate 3D geological model was constructed for each tile using the GSI3D software and methodology (Kessler & Mathers 2004, Kessler et al. 2009). The twelve model tiles were later merged into a unified model and subsequent modelling and calculation of the bedrock units was completed in GOCAD®. This report summarises the metadata compiled during the construction of the individual tiles and the development of the combined model.		The London Basin 1:50 000 resolution geological model covers a total area of 4 800 km<sup>2</sup> in southeast England (Figure 1), stretching from easting 450 000 to 570 000 and from northing 160 000 to 200 000. Because of the large size of the modelled area, the initial construction was divided into twelve 20 x 20 km tiles (Figure 1). A separate 3D geological model was constructed for each tile using the GSI3D software and methodology (Kessler & Mathers 2004, Kessler et al. 2009). The twelve model tiles were later merged into a unified model and subsequent modelling and calculation of the bedrock units was completed in GOCAD®. This report summarises the metadata compiled during the construction of the individual tiles and the development of the combined model.
	[[Image:OR14029_figure1.jpg\|thumb\|600px\|center\|Figure 1 Location of the London model and component tiles]]		[[Image:OR14029_figure1.jpg\|thumb\|600px\|center\|Figure 1 Location of the London model and component tiles.]]

	[[Category:OR/14/029 The London Basin superficial and bedrock LithoFrame 50 model\| 01]]		[[Category:OR/14/029 The London Basin superficial and bedrock LithoFrame 50 model\| 01]]

Dbk at 11:58, 6 March 2015

2015-03-06T11:58:11Z

← Older revision		Revision as of 12:58, 6 March 2015
Line 1:		Line 1:
	The London Basin 1:50 000 resolution geological model covers a total area of 4 800 km<sup>2</sup> in southeast England (Figure 1), stretching from easting 450 000 to 570 000 and from northing 160 000 to 200 000. Because of the large size of the modelled area, the initial construction was divided into twelve 20 x 20 km tiles (Figure 1). A separate 3D geological model was constructed for each tile using the GSI3D software and methodology (Kessler & Mathers 2004, Kessler et al. 2009). The twelve model tiles were later merged into a unified model and subsequent modelling and calculation of the bedrock units was completed in GOCAD®. This report summarises the metadata compiled during the construction of the individual tiles and the development of the combined model.		The London Basin 1:50 000 resolution geological model covers a total area of 4 800 km<sup>2</sup> in southeast England (Figure 1), stretching from easting 450 000 to 570 000 and from northing 160 000 to 200 000. Because of the large size of the modelled area, the initial construction was divided into twelve 20 x 20 km tiles (Figure 1). A separate 3D geological model was constructed for each tile using the GSI3D software and methodology (Kessler & Mathers 2004, Kessler et al. 2009). The twelve model tiles were later merged into a unified model and subsequent modelling and calculation of the bedrock units was completed in GOCAD®. This report summarises the metadata compiled during the construction of the individual tiles and the development of the combined model.
	[[Image:OR14029_figure1.jpg\|thumb\|~~400px~~\|center\|Figure 1 Location of the London model and component tiles]]		[[Image:OR14029_figure1.jpg\|thumb\|600px\|center\|Figure 1 Location of the London model and component tiles]]

	[[Category:OR/14/029 The London Basin superficial and bedrock LithoFrame 50 model\| 01]]		[[Category:OR/14/029 The London Basin superficial and bedrock LithoFrame 50 model\| 01]]

Dbk at 10:52, 6 March 2015

2015-03-06T10:52:52Z

← Older revision		Revision as of 11:52, 6 March 2015
Line 1:		Line 1:
	The London Basin 1:50 000 resolution geological model covers a total area of 4 800 km<sup>2</sup> in southeast England (Figure 1), stretching from easting 450 000 to 570 000 and from northing 160 000 to 200 000. Because of the large size of the modelled area, the initial construction was divided into twelve 20 x 20 km tiles (Figure 1). A separate 3D geological model was constructed for each tile using the GSI3D software and methodology (Kessler & Mathers 2004, Kessler et al. 2009). The twelve model tiles were later merged into a unified model and subsequent modelling and calculation of the bedrock units was completed in GOCAD®. This report summarises the metadata compiled during the construction of the individual tiles and the development of the combined model.		The London Basin 1:50 000 resolution geological model covers a total area of 4 800 km<sup>2</sup> in southeast England (Figure 1), stretching from easting 450 000 to 570 000 and from northing 160 000 to 200 000. Because of the large size of the modelled area, the initial construction was divided into twelve 20 x 20 km tiles (Figure 1). A separate 3D geological model was constructed for each tile using the GSI3D software and methodology (Kessler & Mathers 2004, Kessler et al. 2009). The twelve model tiles were later merged into a unified model and subsequent modelling and calculation of the bedrock units was completed in GOCAD®. This report summarises the metadata compiled during the construction of the individual tiles and the development of the combined model.
	[[Image:OR14029_figure1.jpg\|thumb\|400px\|Figure 1 Location of the London model and component tiles]]		[[Image:OR14029_figure1.jpg\|thumb\|400px\|center\|Figure 1 Location of the London model and component tiles]]

	[[Category:OR/14/029 The London Basin superficial and bedrock LithoFrame 50 model\| 01]]		[[Category:OR/14/029 The London Basin superficial and bedrock LithoFrame 50 model\| 01]]

Dbk at 10:47, 6 March 2015

2015-03-06T10:47:30Z

← Older revision		Revision as of 11:47, 6 March 2015
Line 1:		Line 1:
	The London Basin 1:50 000 resolution geological model covers a total area of 4 800 km<sup>2</sup> in southeast England (Figure 1), stretching from easting 450 000 to 570 000 and from northing 160 000 to 200 000. Because of the large size of the modelled area, the initial construction was divided into twelve 20 x 20 km tiles (Figure 1). A separate 3D geological model was constructed for each tile using the GSI3D software and methodology (Kessler & Mathers 2004, Kessler et al. 2009). The twelve model tiles were later merged into a unified model and subsequent modelling and calculation of the bedrock units was completed in GOCAD®. This report summarises the metadata compiled during the construction of the individual tiles and the development of the combined model.		The London Basin 1:50 000 resolution geological model covers a total area of 4 800 km<sup>2</sup> in southeast England (Figure 1), stretching from easting 450 000 to 570 000 and from northing 160 000 to 200 000. Because of the large size of the modelled area, the initial construction was divided into twelve 20 x 20 km tiles (Figure 1). A separate 3D geological model was constructed for each tile using the GSI3D software and methodology (Kessler & Mathers 2004, Kessler et al. 2009). The twelve model tiles were later merged into a unified model and subsequent modelling and calculation of the bedrock units was completed in GOCAD®. This report summarises the metadata compiled during the construction of the individual tiles and the development of the combined model.
			[[Image:OR14029_figure1.jpg\|thumb\|400px\|Figure 1 Location of the London model and component tiles]]

	[[Category:OR/14/029 The London Basin superficial and bedrock LithoFrame 50 model\| 01]]		[[Category:OR/14/029 The London Basin superficial and bedrock LithoFrame 50 model\| 01]]